Skip to content
Home » 5 Best Ways to Fix DPC_Watchdog_Violation in Windows 11/10

5 Best Ways to Fix DPC_Watchdog_Violation in Windows 11/10

Fix DPC Watchdog Violation in Windows

DPC_Watchdog_Violation is a Blue Screen of Death error that occurs on Windows devices when there is an error with the device driver’s or hardware. The error can make the system crash, freeze or restart unexpectedly. Keep reading this post to learn how to fix it.

What can I do to fix the DPC_Watchdog_Violation error in Windows 11/10?

To fix the DPC_Watchdog_Violation BSOD error, unplug all external devices and scan the hard disk. If that doesn’t help, follow these suggestions:

1. Unplug External Devices

Before you make any changes to your system, unplug any external devices connected to your PC. These devices may include printers, scanners, cameras, etc. Remove all these devices and check if the DPC_Watchdog_Violation error gets fixed.

2. Update Device Drivers

Next, try updating your device drivers. This is because the DPC_Watchdog_Violation BSOD error can occur due to outdated or corrupt device drivers. Here is how you can update your device drivers.

3. Scan the Hard Disk for Errors

DPC_Watchdog_Violation

Errors or corruptions within the hard drive can also be why the blue screen of death errors occurs. To fix these, performing a check disk scan may help. Check Disk is a utility by Windows that can automatically scan and fix hard drive errors and corruptions. Here’s how you can run a chkdsk command:

  • Open an elevated command prompt, type the following command and hit Enter.
    CHKDSK C:/f/r/x
  • The command won’t run as the root drive is still in use; instead, it will ask to begin scanning when your device restarts.
  • Press Y, hit Enter and restart your device.
  • The test check disk command will now start running. Wait for the procedure to complete and check if the error gets fixed.

4. Run SFC and DISM Scans

Outdated and corrupted system files and Windows image files are another reason why the BSOD error DPC_Watchdog_Violation keeps troubling you. Running an SFC and DISM scan can help fix these. Here’s how:

  • Open an elevated command prompt, type the following commands and hit Enter.
    For SFC:
    sfc/scannow
    
    For DISM:
    DISM /Online /Cleanup-Image /CheckHealth
    DISM /Online /Cleanup-Image /ScanHealth
    DISM /Online /Cleanup-Image /RestoreHealth
  • Restart your device once done and see if the error is resolved.

5. Perform a System Restore

If none of these suggestions helped resolve the issue, perform a system restore to a point before the error occurred. However, do this as your last resort, as it can lead to data loss. Before getting started, make sure you have created a restore point earlier. Here’s how to perform a system restore:

  • Press Windows + I to open Settings.
  • Navigate to Update & Security > Recovery and click Restart now under Advanced Startup.
  • Once your device restarts, choose Troubleshoot > Advanced options > System Restore.
  • Here, select a restore point that you created earlier.
  • Click on Next and then on Finish to begin the system restore process.
  • The Windows device will now restart, and the system restore process will begin. This will take several minutes to complete.
  • Once the system restore is complete, your device will be restored to the previously stored version.

Read: How to Perform a Clean Boot in Windows 10/11?

What is the stop code DPC_Watchdog_Violation?

The stop code DPC_Watchdog_Violation is a BSOD error that occurs when the DPC process takes too long to complete or becomes unresponsive. The DPC feature in Windows allows high-priority tasks to interrupt lower-priority tasks to improve system performance.

How to fix DPC_Watchdog_Violation error in Windows 10?

To fix the DPC_Watchdog_Violation on Windows devices, unplug external devices and scan your hard disk for errors. Nevertheless, if that doesn’t help, perform a system restore.

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *